At a glance
Key Takeaways
- A motorized screen intended for everyday comfort is not automatically a hurricane-rated system.
- Storm capability depends on the exact approved system, opening, substrate and attachment details.
- The MagnaTrack Defender Storm System meets Miami-Dade and Florida Building Code hurricane requirements.
- Its manufacturer states spans up to 30 ft × 24 ft; always verify the actual opening and attachment against the applicable approval.
- A permit and building inspection address the installed project; they do not guarantee a storm outcome.
The word screen can describe products built for very different purposes. A screen used to make a lanai more comfortable should not be assumed to provide hurricane protection. A storm-rated system has to be specified for the exact opening and installed in a way that follows its applicable approval.
This guide explains what to ask about when comparing motorized screens for storm protection in Florida. It does not promise that any product will survive every storm or that an approval applies to every opening.
Comfort screen and storm system are not the same thing
A lifestyle screen is selected for how a household uses an outdoor space. A hurricane-rated screen is a particular system with approval requirements and installation conditions. Similar appearance or motorized operation does not make two products interchangeable. The exact model and its documented configuration matter.
Start with the intended purpose. If the screen is being considered as storm protection, identify the specific hurricane-rated system in the proposal. Do not rely on a general product-family name, a sales description or an assumption that any motorized fabric has the same rating. Ask for the approval documentation that applies to the proposed system and the opening.
A system approval has boundaries. The actual opening, supporting substrate, attachment method and installation details must fit the applicable approval. A hurricane-rated system must be installed according to its approval and be permitted and inspected. A product may meet code requirements while a particular opening still needs to be checked for fit and permitted attachment. A generic maximum span does not replace that review.
What Florida Product Approval means in practical terms
Florida Product Approval is a formal product approval framework used for construction products in Florida. Miami-Dade approvals are another relevant approval pathway for products used in the region. These terms help identify reviewed product documentation; they are not interchangeable promises about how every installation will perform in every storm.
For a homeowner, the practical question is whether the exact product configuration proposed is approved for the opening and installation conditions at the home. Ask the contractor to identify the system, approval documentation, opening size, substrate and attachment approach. The documentation and the proposed installation should tell a consistent story.
Avoid relying on a wind-speed number or a broad label without its context. The information provided here does not establish a pressure rating, wind speed, impact test result or insurance qualification for your opening. If those details matter to a decision, ask for the applicable documentation and confirm the specific configuration with the contractor and relevant permitting authority.
The MagnaTrack Defender Storm System
The MagnaTrack Defender Storm System meets Miami-Dade and Florida Building Code hurricane requirements. The manufacturer states that it spans up to 30 ft × 24 ft. That stated span is a manufacturer specification, not a blanket approval for every opening with those dimensions. Actual opening conditions, substrate and attachment must be verified against the applicable approval.
When discussing the Defender, use the exact system name rather than treating it as identical to a lifestyle MagnaTrack screen. Ask that the proposal state the exact system and approval, the measured opening, the supporting substrate and attachment details. If an opening or mounting surface differs from the approved configuration, the contractor needs to resolve that question rather than assume a fit.
The written estimate should also describe the requested work and permit handling. Total Shutter Technologies pulls permits and coordinates applicable building inspections. An inspection checks the permitted construction work under its scope. It is not a wind-mitigation inspection or a wind-mitigation certificate, and it cannot guarantee how a system will fare in a future storm.
Ask for the installation details, not just the product name
Before accepting a proposal, make sure the paperwork is specific enough to understand the system being installed. A useful discussion covers the exact system name, approval, measured opening, substrate and attachment. If the work involves several openings, each should be evaluated as its own part of the project rather than assumed to have identical mounting conditions.
Ask who handles the permit and what building inspections are expected. Confirm that the proposed installation follows the applicable product approval and that changes in field conditions will be discussed. If you have an association, approval from the association is separate from the building permit and should be addressed independently.
The purpose of these questions is not to make a homeowner interpret technical documents alone. It is to make sure the estimate identifies what is proposed and gives you a clear route to ask for supporting information. If something is unclear, request clarification before the scope is finalized.
Operation and preparation before a storm
Learn how your particular system is intended to operate before severe weather is approaching. If the package includes a remote or switch, understand its normal use. If optional wind-sensor automation is part of your configuration, confirm how it is set up and what behavior is expected. Automation is not included in every package, and a sensor is not a substitute for understanding the system.
Power or internet access may not be available during a storm. Do not assume a remote control or internet-connected app will operate the system during a storm. Do not assume that a battery, manual override or backup method is included or available. Ask about the equipment specified for your system and make a household plan that does not depend on an unverified backup feature. Follow official weather and emergency guidance for personal safety.
Do not wait for threatening conditions to learn how the screen works. Use the demonstration and operating instructions provided for your equipment, and contact the company if the system does not behave as expected. Avoid forcing a screen or attempting an improvised repair.
Care and service after installation
Keep the system clean according to the supplied care guidance and pay attention to changes in movement or alignment. A routine maintenance visit can help assess the product and identify concerns that need attention. The appropriate checklist depends on the specific screen system; accordion-shutter maintenance tasks do not describe motorized screen service.
Total Shutter Technologies services all makes and models. If you see damage or unusual operation, arrange professional service rather than assuming that a general product description explains the problem. For storm protection, keeping the exact system and approval information with your home records also makes future questions easier to answer.
Good to know
Frequently Asked Questions
Are all motorized screens hurricane-rated?
No. A lifestyle screen and a hurricane-rated system are not interchangeable. Confirm the exact system and its approval for the actual opening and installation conditions.
Is the MagnaTrack Defender Storm System approved for hurricane requirements?
The MagnaTrack Defender Storm System meets Miami-Dade and Florida Building Code hurricane requirements. Its manufacturer states spans up to 30 ft × 24 ft; actual opening, substrate and attachment must be verified against the applicable approval.
Will a motorized screen operate during a power outage?
Power or internet may not be available during a storm. Backup equipment or manual operation should not be assumed; ask what is included in the specified system and plan accordingly.
