At a glance
Key Takeaways
- A free on-site estimate and custom measurements come before a screen is made to fit an opening.
- Total Shutter Technologies handles the permit process; permitting typically takes one to three weeks and varies by site.
- A clear work area, accessible power and a plan for pets help keep the visit straightforward.
- Installation includes fitting the tracks and housing, connecting the motor and power, setting fabric limits and testing operation.
- The final walkthrough covers the controls included with your system, care and how to get help if something seems wrong.
A new motorized screen involves more than attaching fabric to a patio opening. The opening has to be measured, the right system specified, permits addressed and the finished installation checked in place. Knowing the sequence helps you prepare without guessing how long a visit will take or what a particular package includes.
Here is how a typical MagnaTrack project with Total Shutter Technologies moves from an on-site estimate through the handoff. Site conditions and the selected configuration matter, so your written estimate is the place to confirm the scope for your home.
Before installation: measure, plan and permit
The process begins with a free on-site estimate and custom measurements. A screen is made to fit its opening, so measurements are not a detail to leave until installation day. The visit is also a chance to discuss how you use the lanai, where the screen will sit and which operating options fit the project.
The estimate should make the proposed system and work scope understandable. Ask about the opening, fabric, motor and controls, housing, power requirements and any site-specific considerations. If an existing structure or finish affects attachment, bring that up before the order is finalized. A clear scope makes it easier to compare what is proposed with what you expect.
Total Shutter Technologies handles the permit process. Permitting typically takes 1–3 weeks, but the timing varies by site and permitting review. That is a planning estimate, not a promised approval date or installation date. The required building permit and any related inspection are separate from any required association review; if your home is in an association, handle that approval as its own step.
What to prepare at home
Before the scheduled work, clear the area around the opening so the installers can reach the work zone. Move patio furniture, loose décor and other items that block access. Make the relevant power access available and let the project team know about any access constraints in advance. Keep pets away from the work area and arrange a comfortable place for them while the work is underway.
You do not need to dismantle your lanai or make assumptions about electrical changes. Confirm the specific preparation requested for your project, including where power is available. Requirements can depend on the installation, and the estimate or project coordination is the right source for those details.
What happens during the installation
The installation follows the opening and the system specified for it. The team fits the tracks and housing, installs the motor and power connection, places the fabric, sets its travel limits and tests operation. The order and details can vary with the opening and selected configuration, but the aim is a fitted system that moves through its intended travel and can be demonstrated before handoff.
A careful fit matters. Tracks and housing need to be positioned for the measured opening and the mounting conditions at the home. Fabric travel and limits are then set so the screen stops at its configured positions. Testing gives the installer an opportunity to check operation and make adjustments as part of the installation rather than leaving you with an unexplained control.
Do not assume every project includes the same switch, remote, app access or automation. Controls vary by package. Wind-sensor automation may be an option, but it is not included in every configuration; ask what is specified in your estimate and how any selected sensor is intended to operate. Likewise, do not assume that power equipment or backup behavior is part of a system unless it is expressly included.
Keep the work area accessible
During the work, leave the opening and nearby route clear. If you have questions about an item being moved or the location of a control, raise them with the installer rather than interrupting a task that requires access to the opening. You can also identify the person who will be available for the walkthrough before work begins.
The walkthrough: controls, testing and questions
At handoff, the installer walks you through the controls supplied with your project and demonstrates normal operation. Depending on the specified package, that may mean a remote, wall switch or app; it does not mean all three are automatically provided. If wind-sensor automation was selected, ask how it is configured and what behavior to expect. The walkthrough should match the equipment in your written scope.
Watch the screen travel and note anything that looks or sounds unusual. Ask how to operate it, what routine care is appropriate and whom to contact if you notice a problem after the visit. If you are unsure about a control or the screen does not behave as demonstrated, mention it while the installer is present so the concern can be understood and addressed.
The project also has a permitting path that is distinct from the operational demonstration. Total Shutter Technologies pulls the permit and coordinates building inspections as applicable. A permit inspection is not a wind-mitigation inspection or a certificate of wind mitigation; do not treat one as the other.
After installation: care, service and warranty wording
Routine attention helps you notice a change in operation early. Keep the screen and surrounding area reasonably clean, follow the care guidance supplied for your system and avoid forcing a screen that does not move normally. If you see a problem, stop and contact the company rather than attempting a repair that could affect the system.
Total Shutter Technologies services all makes and models. Annual maintenance is a practical way to have a system assessed and to ask questions about its operation. The exact work should be appropriate to the product; a maintenance visit for a motorized screen is not the accordion-shutter checklist.
For MagnaTrack, the warranty wording is: Limited lifetime warranty on hardware. Warranty details are provided in writing with your estimate for other products. Review the written documentation for the system included in your project and keep it with your project records.
A simple way to make the day easier
The most useful preparation is modest: make access clear, arrange power access as discussed, keep pets clear of the work zone and have your control questions ready. The most useful follow-through is equally straightforward: watch the demonstration, confirm what equipment was supplied and keep the written estimate and product information.
Total Shutter Technologies is an authorized MagnaTrack dealer; MagnaTrack is made by Progressive Screens. If you are planning a screen for a Sarasota-area home, ask for a site-specific estimate rather than relying on a generic description of another opening. That conversation can clarify measurements, permit coordination and the system options that fit your home.
Good to know
Frequently Asked Questions
How long does permitting take?
Permitting typically takes one to three weeks, but timing varies by site and permitting review. It is not a guaranteed approval or installation date.
What should I do before the installers arrive?
Clear the work area, make the discussed power access available and keep pets away from the opening. Confirm any project-specific preparation with the team.
Will my screen include an app or wind sensor?
Controls and options depend on the package in your estimate. A remote, switch, app or wind-sensor automation is not automatically included in every configuration.
